Seawall Repair in Broward County, FL
Seawall repair in Broward County runs from sealing cracks to re-anchoring a leaning wall. See the height rule, permits and published costs, then pick your city. We assess on site and coordinate licensed contractors.
- 24/7Call or request any time
- FreeNo cost to request a quote
- No obligationNo pressure to book
- 8 townsBroward waterfront
Seawall repair in Broward County
Seawall repair in Broward County runs from sealing cracks and refilling voids behind the wall to repairing caps and re-anchoring a leaning wall, and structural work needs a city permit plus a county license for work in county waters. The height rule, the citation clock and the permit office depend on your city. This page is the county overview, and every city we cover has its own page.
Seawall repair in Broward County at a glance
| Height standard | New and substantially repaired seawalls and caps need a top elevation of 5 ft NAVD88. Applications before January 1, 2035 may be permitted at 4 ft if the wall is designed to reach 5 ft by January 1, 2050 (County Code Sec. 39-407). Cities adopted their own versions, and a few differ, so check your city's row below. |
|---|---|
| Substantial repair | Work along more than 50 percent of the shoreline, or appurtenant work costing more than 50 percent of the cost of a tidal flood barrier. Then the whole shoreline must meet the height rule (County Code Sec. 39-406). |
| Maintenance and citations | Owners must keep the wall in good repair, and tidal water flowing through or over it onto a neighbor or the right-of-way is presumed disrepair. Most cities allow 60 days to show progress and 365 days to finish after a citation (Hollywood Sec. 150.30 is one example). |
| Permits | A city building permit, usually with sealed plans and surveys, plus a Broward County license for work in, on, over or under county waters (Broward 311). Repair of an existing functional seawall within one foot of its original location can qualify for the county's General License, which lists a $200 application fee (county form). |
| Published cost | Moderate repairs such as crack injection, spot panel repair and cap resurfacing: $100 to $250 per linear foot (Souffront). Crack injection: $2,000 to $8,000 per job (JKT Marine). Full panel and tieback replacement: $400 to $600 per linear foot (Souffront). Published ranges, not quotes. |
| Who does the work | A licensed, insured local seawall contractor pulls the permits and builds the repair. We assess the wall on site and coordinate the contractor. Read how to hire and vet a seawall contractor. |
Seawall repair in Broward County by city
Pick your city for local waterways, code citations, permit checklists and a free quote form. The table lists the height standard and permit contact for each.
| City page | Waterways and neighborhoods | Height standard | Permit contact |
|---|---|---|---|
| Seawall repair in Fort Lauderdale | New River, Las Olas isles, Rio Vista, Harbor Beach, Coral Ridge | 5 ft NAVD88; 4 ft before 2035 if built to reach 5 ft | Development Services, 954-828-6520 |
| Seawall repair in Hollywood | Hollywood Lakes, Harbor Islands, the Intracoastal | 5 ft NAVD88; 4 ft before 2035 if built to reach 5 ft | Building Division, 954-921-3335 |
| Seawall repair in Dania Beach | Dania Cut-Off Canal and the Intracoastal | 5 ft NAVD88; 4 ft before 2035 if built to reach 5 ft | Building Division, 954-924-6805 |
| Seawall repair in Hallandale Beach | Golden Isles, Three Islands, Intracoastal condos | 5 ft NAVD88; 4 ft before 2035 if built to reach 5 ft | Building Division, (954) 457-2220 option 2 |
| Seawall repair in Wilton Manors | North and South Forks of the Middle River | 5 ft NAVD88; no 4 ft option in the code | Community Development Services, (954) 390-2180 |
| Seawall repair in Lighthouse Point | Deep-water canals near the Hillsboro Inlet | 4.0 ft NAVD88 cap minimum, may be raised to 5.0 ft | Building Department, 954-943-6509 |
| Seawall repair in Oakland Park | Middle River canals | 5 ft NAVD88; 4 ft before 2035 if built to reach 5 ft | Building and Permitting Services, 954-630-4350 |
| Seawall repair in Pompano Beach | Hillsboro Inlet south, Lake Santa Barbara, Cypress Creek | 5 ft NAVD88 minimum, 5 ft 10 in maximum | [email protected] |
Quick answers for each city, on one line:
- Fort Lauderdale: height, raise deadline, permit
- Hollywood: height, raise deadline, permit, cost
- Dania Beach: height, permit
- Hallandale Beach: height, raise deadline, permit
- Wilton Manors: height, raise deadline, permit
- Lighthouse Point: height, permit, cost
- Oakland Park: height, raise deadline, permit, cost
- Pompano Beach: height, raise deadline, permit, cost
Own a wall on the New River or the Las Olas isles? Start with the city page for seawall repair in Fort Lauderdale, which is the most detailed. For rules that compare across cities, read Broward seawall rules by city and the Broward County seawall height requirement guide.
What fails on Broward seawalls and how it is usually fixed
| What you see | Typical repair | Read more |
|---|---|---|
| Hairline or wider cracks in panels or cap | Crack sealing or injection; leaking cracks use flexible resin | Seawall crack repair |
| Sand or soil at the joints, sinkholes, soft ground | Joint sealing with filter fabric, void filling, drainage repair | Leaks, soil loss and sinkholes |
| Cracked, spalled or low cap | Cap repair or a new cap, also the usual way to add height | Seawall cap repair |
| Leaning wall, wavy cap line | Tiebacks, anchors, walers or piles after engineering review | Panel and tieback failure |
| Scour at the base | Toe protection and rip-rap | Seawall repair methods |
| Collapse or sudden failure | Make safe, document, then engineered repair | First 48 hours after a collapse |
The seawall repair methods, costs and diagnosis page explains each method with sources. Not sure whether the wall needs repair at all? Start with seawall inspection in Broward County.
How a seawall repair job runs in Broward County
- Assessment. Someone looks at the wall in person, photographs the cap, joints, panels and toe, and records what is failing and why.
- Engineering and survey. Structural work needs sealed plans, and many cities ask for sealed surveys of existing and proposed elevations.
- Permits. A city building permit and a Broward County license for work in county waters, plus state or federal review where the scope calls for it (county ePermits page). The contractor normally files them.
- Construction. Repair or replacement by a licensed, insured contractor, with inspections along the way.
- Final inspection. Final approval, and in many cities a final survey showing the finished elevation.
Ask every contractor to list permits, engineering, surveys and the county license as separate lines so that quotes can be compared. Our seawall repair cost guide shows published figures, and it is joined by city cost pages for Pompano Beach, Hollywood, Lighthouse Point and Oakland Park.
Repair or rebuild: the 50 percent line
A targeted repair can stay targeted until it crosses the substantial repair threshold. Past that line the whole shoreline has to meet the height standard, which changes the price. Ask each contractor to price both a targeted repair and a compliant rebuild so you can see the trade-off. Our cap repair vs replacement guide and the seawall replacement page cover the second option.
Hiring for a Broward seawall repair
We are not a contractor, and we do not hold a contractor license. We assess your wall on site and connect you with licensed, insured local seawall contractors who do the work. Before you sign with anyone, run the checks in our guide on how to hire and vet a seawall contractor: license, county records, insurance, permits, references and contract terms.
Not in one of the eight cities?
Our city pages cover Fort Lauderdale, Hollywood, Dania Beach, Hallandale Beach, Wilton Manors, Lighthouse Point, Oakland Park and Pompano Beach. If your wall is elsewhere in Broward County, send a request and we will tell you whether we can help. The county-level rules above still apply, but confirm your city's version with its building department.
Planning seawall repair in Broward County? Call (754) 484-1777 or request a free assessment. We look at the wall on site, document what we find, and coordinate licensed local professionals if you need more.
Sources
- Broward County Code of Ordinances, Chapter 39, Article XXV, Resiliency Standards for Tidal Flood Protection, Secs. 39-404 to 39-408 (Municode)
- Broward County 311: Do I need a license to replace or repair my dock or seawall?
- Broward County Environmental Permitting Division: Application for an Environmental Resource General License
- Broward County ePermits OneStop: Environmental Resource License (any activity in, on or under water or wetlands requires a license)
- City of Hollywood Code Sec. 150.30: Resiliency Standards for Tidal Flood Barriers
- Souffront Contractors: Hiring a Seawall Contractor in Fort Lauderdale (published price ranges)
- JKT Marine: Seawall Repair Cost South Florida 2026 (contractor-published price table)
General information, not legal or engineering advice. Rules and prices change. Confirm requirements with your city, Broward County and a licensed professional.
Seawall services in Broward County
Broward County service area
Stylized service-area chart. The Google map loads only if you click.
Broward County seawall repair questions
Do I need a permit to repair a seawall in Broward County?
In practice yes for structural work. Installing, replacing or making a major repair to a seawall needs a building permit from your city, and Broward County requires a license before any work in, on, over or under county waters, including seawall repair. A licensed contractor normally files both. Ask your city's building department about smaller jobs.
How high does a seawall have to be in Broward County?
New and substantially repaired seawalls need a top elevation of 5 feet NAVD88 under the county standard. Applications before January 1, 2035 may be permitted at 4 feet if the wall is designed to reach 5 feet by 2050. Cities adopted their own versions, and a few differ, so check your city's page.
How much does seawall repair cost in Broward County?
Published South Florida ranges are about $100 to $250 per linear foot for moderate repairs, $2,000 to $8,000 per job for crack injection, and $400 to $600 per linear foot for full panel and tieback replacement. Engineering, surveys and permits are extra. These are published ranges, not quotes.
What happens if my city cites my seawall?
Most Broward cities expect you to show progress within 60 days of the citation and finish within 365 days. If the needed repair is substantial, the wall must be designed, permitted, built and inspected to the height standard within that time. Check your city's raise deadline page for the exact wording.
How do I choose a seawall contractor in Broward County?
Check the license on MyFloridaLicense.com and in Broward County's contractor license search, ask for a certificate of insurance, confirm who pulls the permits, get written quotes with permits and engineering as separate lines, and talk to recent customers. Our guide on hiring a seawall contractor walks through each step.
Do you serve all of Broward County?
Our city pages cover Fort Lauderdale, Hollywood, Dania Beach, Hallandale Beach, Wilton Manors, Lighthouse Point, Oakland Park and Pompano Beach. If you are elsewhere in the county, send a request and we will tell you whether we can help.